Bosch MS6.1 EVO Gasoline PFI ECU

Bosch part number: F02U.V03.113-01 (F02UV03113-01)

Port-injection engine management for up to 12 cylinders, the entry point to the MS 6 EVO platform, with capability unlocked by software packages as your programme grows.

- Low-pressure (port) injection, up to 12 cylinders to 12,500 rpm, high-impedance injectors
- 12x ignition outputs (IGBT or BJT; coils with integrated amplifier supported)
- 21 analog inputs in base configuration, expandable to 38 with the Measurement Package
- 4 GB logging on Partition 1 (100 configurable channels at 20 Hz); FULL_LOG upgrades take it to 1,500 channels at 1 kHz
- Electronic throttle, VVT and turbo control unlock with Engine Function Package I; traction and launch control with Engine Function Package II
- 2x Ethernet, 3x CAN, 1x LIN, 8x SENT, 1x RS232; IP54 aluminium housing, 1,086 grams

How the MS 6 EVO range works
All four MS 6 EVO models share the same hardware platform:
- 226 x 181 x 44 mm aluminium housing, 1,086 grams, two Bosch connectors (196 pins)
- Dual-core 667 MHz CPU with FPGA; 6-18 V supply
- 2x Ethernet, 3x CAN, 12 ignition outputs
- Port injection for up to 12 cylinders at up to 12,500 rpm
What changes between models is injection capability (port-only vs direct + port) and how much measurement and function content is included versus unlocked later by software package. You can start lean and add capability as the programme grows; the packages install as licences, no hardware swap.

Choosing a model
- MS 6.1 EVO, port injection; 21 analog inputs, the entry point: engine functions and extra measurement unlock via packages
- MS 6.2 EVO: port injection; the Engine Function I-II and Measurement package content included as standard (38 analog inputs)
- MS 6.3 EVO, direct + port injection; 21 analog inputs base, Measurement and second-HP-pump packages optional
- MS 6.4 EVO: direct + port injection; Measurement (38 analog inputs) and second-HP-pump content included
- MS 6.4P EVO: same hardware, running its own torque-structure project software line (not compatible with MS 6.4 EVO software)
Logging upgrades, gear control, CCA and the Innovation licences are separate options on all models.
Above the MS 6 sits the MS 7.8 / MS 7.8-ADV: more inputs, faster processing and full logging included as standard. Not sure what your programme needs? Talk to us. 909 supplies, installs, supports and calibrates the full Bosch Motorsport range.

To complete the installation: 91-pin mating connector and 105-pin mating connector for harness builds.

Data sheet (PDF)